Pages

February 10, 2013

Breakthrough for superefficient conversion of heat to electricity could boost coal plant efficiency to 54% from 30-45% and concentrated solar power to 40%

Arxiv - Thermionics (electronics for converting heat to electricity) previously had efficiency limitations due to “space current” – build-ups of electrons mutually repelling each other and choking the flow of current – so the new system uses external electric or magnetic fields to get the electrons going in the right direction. The system promises a high fraction of the Carnot Limit can be converted directly into electrical power.


54% Efficient Coal Plants for one third less coal for the same power
The new thermoelectronic approach promises efficiencies in the high 40-50% range, achieving the latter by acting as a “topping cycle” to a lower temperature steam system. For example a coal furnace burns at ~1500 C (1773 K), but a steam turbine runs at 700 C (973 K) and outputs at 200 C (473 K). Thus there’s significant loss due to the mismatch between furnace and steam power-cycle. A thermoelectronic converter covering the 1773-973 K range will add significantly to the overall power extracted by the power-plant pushing its efficiency above 50%. In this case a 45% efficient coal plant can be pushed to 54%, thus increasing the power output for no additional fuel costs and NO MOVING PARTS.

40% efficient concentrated solar power
Switching to solar-power applications, imagine a thermoelectronic converter at the centre of a concentrator system which focuses sunlight to 500 times its normal intensity (temp ~1900 K.) By using a Photon Enhanced Thermionic Emission (a cousin of the Photoelectric effect) the system can convert raw sunlight to electrical power at over 40% efficiency



ABSTRACT - Electric power may, in principle, be generated in a highly e cient manner from heat created by focused solar irradiation, chemical combustion, or nuclear decay by means of thermionic energy conversion. As the conversion e ciency of the thermionic process tends to be degraded by electron space charges, the e ciencies of thermionic generators have amounted to only a fraction of those fundamentally possible. We show that this space-charge problem can be resolved by shaping the electric potential distribution of the converter such that the static electron space-charge clouds are transformed into an output current. Although the technical development of practical generators will require further substantial e orts, we conclude that a highly e cient transformation of heat to electric power may well be achieved.

Optimization of the conversion effi ciencies requires the development of metal or semiconductor surfaces with the desired e ffective work functions and electron a nities, respectively, which may also be done by nanostructuring the electrode surfaces. These surfaces need to be stable at high temperatures in vacuum. The tunability of the gate fi eld opens possibilities to alter the converter parameters during operation. Although the need to generate Cs+ ions to neutralize the space-charge cloud is eliminated, adatoms of elements such as Cs can be used to lower the work function of the electrodes, in particular of the collector. For high effi ciency, the devices must be thermally optimized to minimize heat losses through the wiring. Furthermore, thermal radiation of the emitter must be reflected e fficiently onto the electrode. For ballistic electron transport between emitter and collector, a vacuum of better than 0:1 mbar is also required, reminiscent of radio tubes.

Such devices may be realized, for example, in a flip-chip arrangement of oxide-coated wafers separated by
tens of micrometers using thermal-insulation spacers. This produces hundreds of Watts of power from active areas of some 100 cm2. The magnetic fi elds, typically 1 T with large tolerances in strength and spatial distribution, can be generated by permanent magnets or, for applications such as power plants, by
superconducting coils. Achieving viable, highly e fficient devices requires substantial further materials science efforts to develop the functional, possibly nanostructured materials, as well as engineering e orts to achieve a stable vacuum environment in order to minimize radiative and conductive heat losses, and to ensure competitive costs. Remarkably, however, no obstacles of a fundamental nature appear to impede highly e fficient power generation based on thermoelectronic energy converters.

If you liked this article, please give it a quick review on ycombinator or StumbleUpon. Thanks
blog comments powered by Disqus