IEEE Spectrum - Flash memory wears out after being programmed and erased about 10 000 times. That’s fine for a USB dongle that you’ll probably lose in a year, but not ideal for the solid-state drives of server farms. And the same problem keeps manufacturers from using flash to replace other types of computer memories. This month, at the 2012 IEEE International Electron Devices Meeting, engineers from Macronix plan to report the invention of a self-healing NAND flash memory that survives more than 100 million cycles.
What’s more, that may not even be the real limit. “We do not know what would eventually cause the device to fail, since we have not seen the end-of-life signals yet,” says Hang‑Ting Lue, a project deputy director at Macronix, which is located in Hsinchu, Taiwan. To test for 1 billion cycles would take several months, he says
Hot Stuff: Current flowing through the memory cells’ gate heats and heals the oxide layers.
Macronix engineers saw a solution in a competing technology, phase change RAM. In PCRAM, a bit is stored in a material called a chalcogenide glass, which can be either conductive or insulating. The bit’s material switches between those states when briefly heated in a particular way. According to Lue, Macronix researchers noticed that heating the glass to its melting point had a kind of healing effect on their PCRAM. (They reported those results at the IEEE International Reliability Physics Symposium in April 2012.)
Macronix engineers figured that a similar trick would work for flash, so they redesigned a flash memory chip to include tiny onboard heaters that could anneal small groups of memory cells. The redesign required quite a few changes. The biggest one, says Lue, was altering the gate electrode so that it could carry current to heat the memory cells. That alteration, which included the addition of diodes, took up so much space that the Macronix team had to devise a new architecture for its memory arrays to squeeze it all in, he adds.
The modified structure enables current to pass through the transistor’s gate to generate pulses of heat a few milliseconds long. Researchers found that temperatures exceeded 800 °C but that the hot spot was restricted to the area near the gate. The chips were able to heal themselves through this onboard annealing to the point that even after 100 million cycles, the researchers claim, the memories held data well.
You might think all this heating would be bad for battery life. The “refreshing” does require a substantial amount of power, Lue concedes, but the annealing can be done infrequently and one sector at a time, while the device is inactive but still connected to the power source. “It’s not going to drain your cellphone battery,” he says.
The experimental memory yielded another surprise: The heating allowed faster erasing, something that was thought to be independent of temperature. “Further down, this may evolve into a ‘thermally assisted’ mode of operation that gives both better performance—such as the faster erasing—and better endurance flash memory,” Lue says. Faster erasing could eventually result in flash taking over from dynamic RAM, the volatile but fast computer memory, but it would take a lot to get there. “Flash is not a random access memory, and the architecture will need to be completely different,” he says.
Lue says Macronix intends to capitalize on the self-healing flash breakthrough, but he would not give details about how and when. He was more forthcoming about when the flash industry should have worked in this technology. “It took a leap of imagination to jump into a completely different regime…very high temperature and in a very short time,” says Lue. “Afterward, we realized that there was no new physics principle invented here, and we could have done this 10 years ago
If you liked this article, please give it a quick review on ycombinator or StumbleUpon. Thanks