UNDERWRITERS LABORATORIES -- Rossi said that they have sent prototypes to UL, and they are working with them to get the home unit certified for "UL approval".
This was a major announcement. If they are at this state of development, it means they are very far along. This alone would be worthy of a feature story. As far as we know, this is the first exotic free energy technology that has been submitted for UL approval.
You don't submit something to UL until you have a final version. What is submitted to UL is what is taken to market. If any changes are made, they have to once again pass through the UL certification process, which takes several months.
REACTOR CORE -- The reactor core of the home E-Cat unit is about the size of a cigarette box, and is capable of producing ten kilowatts of power. The size of the entire unit will be about the same as a home computer (which I think indicates it is the size of a desktop.) This is a significant reduction in size from previous figures provided. This makes a home E-Cat unit very small and compact. He also claims that the weight has been reduced as well. It was also clarified that each individual home E-Cat system will utilize one reactor core. This is different than what was stated only a couple months ago, which indicates just how rapidly progress is being made. If the reactor core is the size of a single pack of cigarettes (about 85 cubic centimeters) and can produce 10 kilowatts of power, this makes the power density 117 watts per cubic centimeter -- a super high value! SIMPLE REFUELING -- It was revealed home E-Cat units would be capable of being re-fueled by individuals, and not by technicians. He claimed it would be like changing the ink in a pen. After using a cartridge for 180 service days (when the system is actively in use), the system will indicate it needs to be replaced. Once a new cartridge is obtained from his company or a member of their network, the old one will be removed, and the new one popped in. The old cartridge will then be sent to Leonardo Corporation to be recycled. Interestingly, he seemed to indicate that much of the remaining nickel could be salvaged, and it would only need to be re-processed. Each cartridge will cost only about ten dollars, although at first the price could be slightly higher. Once again, he asserted that such small amounts of nickel are used, that there is zero possibility of a shortage due to the proliferation of the E-Cat technology. If the entire world converted all their power producing systems to run off nickel, only 1% of the annual production would be consumed. Though the E-Cat is likely to propagate extensively, we envision many other free energy technologies also emerging, and some of those modalities don't consume any fuel whatsoever, and may be likely to obsolete many of the potential long-term applications of the E-Cat. As cheap and abundant as Nickel is, it isn't infinite, like some other energy sources such as Zero Point Energy. NO HYDROGEN CANISTER -- Unlike previous E-Cat systems which required the use of a hydrogen canister, the new home E-Cat utilizes a material inside of the reactor core which can release and absorb hydrogen. Due to this, no hydrogen canister is needed. I am assuming that the hydrogen release and absorption is controlled via the temperatures produced in the reactor core. Probably when the heat is high the hydrogen is released, and when the temperature goes down the hydrogen is absorbed. Although about ten grams of hydrogen will be placed in the core, only picograms will actually be consumed in the nuclear reactions. The removal of the hydrogen canister will make the certification process simpler, because it had previously been a significant hoop to jump through. Also, I think the lack of hydrogen canister greatly contributes to the size reduction of the system. This is a major breakthrough, and is really, really big news! DIRT CHEAP ENERGY -- The cost of a home E-Cat unit was stated to be between $400 and $500 dollars. This will be accomplished through the best engineering possible of the production line, automization of all aspects of the factory, and the use of robotics. The goal is to make this technology so affordable that everyone will be able to purchase a system, and competitors will not be able to under sell him. Although his technology will obviously be reverse-engineered when the units start to sell, it does not matter because he will have a major head start.If you liked this article, please give it a quick review on ycombinator or StumbleUpon. Thanks