DARPA’s photonics projects – At the edge of possibility

Laser Focus World – DARPA’s photonics projects – At the edge of possibility

Nextbigfuture previously had a DARPA high energy laser update that listed all of the DARPA laser projects, the funding levels and goals.

The goal of HELLADS (High Energy Liquid Laser Area Defense System) is to shrink the mass of high-energy lasers by an order of magnitude, so a 150 kW laser can be integrated into tactical aircraft. That’s the power level sought for defense against rockets, artillery, mortars, and surface-to-air missiles at distances up to a couple of kilometers. The mass target is less than five kilograms per kilowatt of output, so the whole laser would weigh less than 750 kg. Although DARPA has not identified the design, other documents say it is a diode-pumped solid-state slab laser with flowing index-matched coolant.

In February 2011, DARPA reported that two different designs for unit cells having integrated power and thermal-management systems had exceeded 34 kW. At the end of June, the agency reported high beam power and quality in laboratory tests of a small, lightweight laser module

hased array of laser emitters mounted on the surface of an aircraft would generate and steer a combined beam. The two views show the surface and a cutaway view. (Courtesy of DARPA)

In June, General Atomics received $40 million to continue HELLADS development. Unit cells will be replicated and assembled into a full-power 150 kW laser in the laboratory. When that laser is finished next year, it will be integrated with beam control, a power source, thermal management, and command-and-control subsystems. That system will be moved to the White Sands Missile Range in early 2013 for ground tests against rockets, mortars, and surface to air missiles.

DARPA is also hedging its bets on 150-kW-class lasers by looking at prospects for scaling an electrically excited version of the chemical oxygen-iodine laser (COIL). Oxygen-iodine lasers promise high power, but field commanders want battlefield lasers to be powered by electricity rather than special chemical fuels that could pose logistical problems. Developers of the discharge-excited COIL (DECOIL) program, powered by a microwave discharge, will first seek to reach 10% wallplug efficiency at 100 W, then try to scale the technology to demonstrate 1 kW output with wallplug efficiency of at least 10%. The next step after that would be scaling to 150 kW.

The agency also is working on nonweapon lasers. The Blue Laser for Submarine Laser Communications program seeks to demonstrate that 455 nm solid-state lasers and cesium atomic-line filters could be used for high-speed two-way communications to submarines. Attempts to develop blue-green lasers for satellite-to-submarine links go back decades, but the lasers have always proved too bulky for deployment. New blue solid-state lasers could avoid that problem and might also be used for water-penetrating lidars usable in daylight.

Some DARPA laser projects are further out. One named Ultrabeam seeks to demonstrate gamma-ray lasers with laboratory-scale equipment. Last year the agency reported a laboratory-scale x-ray laser emitting 4.5 kiloelectron photons in 30-as pulses with 10 mJ energy. The next phase seeks to boost that x-ray laser technology and use it to demonstrate coherent gamma-ray amplification in solids with high atomic numbers, for potential applications in 3D molecular imaging and debris-free advanced lithography.

Beam combination and steering

Another route to high powers is combining the beams from many limited-power lasers into a single beam with much higher power. It is most attractive for fiber and direct diode lasers, which offer higher efficiency than bulk diode-pumped solid-state lasers but are limited in output power and/or beam quality by factors such as nonlinear effects and emitting aperture size. DARPA has been exploring both beam combination and techniques for steering combined beams electronically, like phased-array radars.

The Excalibur program is aimed at developing scalable high-power phased arrays of many solid-state (particularly diode or fiber) lasers with higher efficiencies than attainable by diode-pumped bulk solid-state lasers. Potential applications include multifunction arrays, usable for target designation, laser communications, laser radar, and countermeasures, as well as 100-kW-class laser weapons.

Excalibur draws on technology developed in several earlier DARPA programs. Three projects developed crucial laser technology. Coherently Combined High-power Single-mode Emitters (COCHISE) produced high-brightness diode lasers. Those diodes could pump fiber amplifiers developed by the Revolution in Fiber Laser (RIFL) project that generate beams which can be combined coherently and spectrally. The High-Power Efficient and Reliable laser bars (HiPER) project developed kilowatt-class diode arrays, with the high spatial and temporal modulation bandwidths needed for Excalibur’s adaptive optics system.

n the long term, DARPA hopes to produce lasers capable of “high-power air-to-air and air-to-ground engagements … that were previously infeasible because of laser system size and weight.” That might include lasers small enough to defend unmanned aerial vehicles against next-generation shoulder-launched missiles.

A program called SWEEPER (Short-range, Wide field-of-view, Extremely agile, Electronically steered Photonic Emitter) aims to develop monolithic near-IR phased arrays to replace mechanical beam steering for lower-power lasers. The goal is “chip-scale” photonic ICs 64 elements square that can handle 10 W of power, focus it into an instantaneous field of view narrower than 0.1°, and scan across more than 45° with frame rates of 100 Hz.

Those long-term goals are ambitious. They would require increasing scanning speed a thousand-fold, reducing size by a factor of 100, achieving facet pitch of a wavelength or two, and controlling phase precisely across the whole array. For next year, DARPA seeks to demonstrate an 8 × 8 beam-forming chip, as well as beam-steering capability across a 10° × 10° area. If successful, the agency says, the technology could have dramatic impact in applications such as surveillance, 3D imaging, navigation, sensing, diagnostics, and surgery.

If you liked this article, please give it a quick review on ycombinator or StumbleUpon. Thanks